Static or Cut Outs:
1)Turn all body packs off first by sliding the switch on top to ‘off’ on all mic packs.
2) Your Shure receiver is located inside the AV rack at the very top. To start frequency scan, press the button that says "GROUP”. This will allow the receiver to scan a new group and channel.
3)After the scan is finished, power on one body pack and match the body pack to the group and channel that’s displayed on the receiver. Once you confirm that body pack is working, turn it off and repeat step 3 with any additional body packs. You can only have one body pack powered on at a time or the system will not work properly.