Bluetooth Pairing (Attero Tech unBT2A)
Users should be connected to the CriticalStudio wifi to ensure the fastest and most reliable internet connection for streaming. The credentials are as follows.
WiFi SSID: CriticalStudio
Users connect their Bluetooth® audio enabled smart device by simply pressing the front panel “PAIR” button. The blue Bluetooth® status LED will begin flashing to indicate that the unBT2A is now visible to other Bluetooth® devices and accepting pairings.
This pairing period lasts 60 seconds after which the status LED will stop flashing and turn off and the unBT2A will disable its Bluetooth® interface. *Note: The name visible to other devices is “unBT2A”.
If a successful pairing is made during the pairing period, the status LED will stop flashing and turn constantly on.
To disconnect a device from the unBT2A, press and hold the PAIR button for 5 seconds and then release it. The status LED will turn off, and the connection will be reset. Another device may now be connected by repeating the pairing process. *Note: This must be done before another device can be successfully connected without interruption.